Skip to content

Service & Repair

Cold Storage Door Repair.
Any Box. Any Brand.

Cold storage door repair, panel repair, gaskets and hardware — we fix boxes we built and boxes we didn’t. A crew is on site within one business day across New England — or as fast as we can get there, depending on your location.

Repairs

Big Problems. Small Problems. Same Crew.

Cold storage doesn’t fail on a schedule. A worn-out gasket and a freezer wall a forklift punched through get the same crew and the same commercial-grade stock we install on new builds.

Panels

Panel Damage

We cut out the damaged area, put in new panel that matches your thickness and finish, and seal it back up to the same standard we build to. No patch jobs. We don’t just slap on foil tape and call it fixed.

Forklift and impact damage
Wet insulation, or metal peeling off a panel
One panel swapped, or new metal on a whole wall
Insulated metal panels stacked in the RSNE shop in Lakeville

Doors

Door Trouble

Manual or automatic, we service the whole opening — the door, the motor, the tracks, and the seals, including bi-part doors that split in the middle and slide apart. Most service calls get the door closing and sealing the same day.

Sagging doors, broken hinges and worn-out gaskets
High-speed roll-up doors, sliding doors and bi-part doors
Openers, motors, sensors and tracks
Glass reach-in and display door service
Galvanized strap hinge on an outdoor walk-in cooler door at Berkshire Grown

The small stuff

The little failures that let heat in and run up the power bill.

A faulty gasket can become a full box replacement — a bad seal or a sagging hinge today turns into a frozen floor and soft panels in six months. We’d rather take the small call now.

Gaskets, sweeps and door hardware
Heater wires and threshold heaters
Vapor seal touch-ups (the seal that keeps damp air out of the walls)
Floor and ceiling repair

What we don’t do

We service the structure: panels, doors, gaskets, the vapor seal, and hardware. For refrigeration and controls, we coordinate with your refrigeration contractor — or recommend one we trust.

Response

Whatever Broke. Same Response.

A service call should be a repair, not a waiting list.

On site in one business day. Across New England — or as fast as we can get there, depending on your location. If your box or your door is completely out of service, call us and we’ll move what we have to.
No waiting on materials. Panels, doors, gaskets and hardware in stock in our Lakeville shop — the same commercial-grade stock we install on new builds.
Anyone’s box, any brand. Power or manual, we repair what we built and what others built. Trust us, we’ve fixed them before. If panels need matching, we’ll match them.
Free on-site evaluation. We look at the box before we quote it, and if a long-term repair will save you the cost of a new box, that is what we quote.
All of New England — plus New York, and major projects nationwide. If the project is big enough, we travel. Headquartered in Lakeville, MA.
After hours and overnight. Restaurants, grocery, food plants: we schedule around your operations and clean up at the end of every shift.

FAQ

Cold storage door repair questions.

How fast can you get someone on site?
An expert repair crew is on site within one business day across New England — or as fast as we can get there, depending on your location. If your box or your door is completely out of service, call us and we’ll move what we have to.
Do you repair walk-in coolers and walk-in freezers?
Every day. Walk-in cooler and walk-in freezer repair is most of our service work: panels, doors, floors, gaskets, hardware. If your box is losing temperature, call us. See what we build in walk-in coolers and freezers.
Do you only service walk-ins you built?
No. We repair walk-ins, freezers, and cold storage rooms and buildings built by anyone. Same crew, same quality. If panels need to be matched, we’ll match them.
Can you fix it, or do I need a full replacement?
Most of the time we can fix it: new panel pieces, door rebuilds, gasket and hardware swaps. When the damage is too far gone we’ll tell you straight, and quote the replacement. Our guide walks through how to decide: repair or replace a walk-in.
Do you service automatic and high-speed doors?
Yes. We work on every kind of cold storage door: high-speed roll-up, automatic sliding, bi-part, and impact doors, the swinging kind a forklift pushes straight through. Power or manual, any brand — we service the door, the motor, the controls and the seals, not just the panel around it.
Can you work after hours or overnight?
All the time. Restaurants, grocery, food plants — we schedule around your operations and clean up at the end of every shift.

Still not sure?

We’ll come look at it.

A free on-site evaluation of an existing walk-in costs you nothing. If a long-term repair will save you the price of a new box, that’s what we quote. If it won’t, we’ll tell you, and break down the cost of the replacement for you.

Service line

(508) 946-5555

Monday to Friday, 7 to 4. After hours and overnight by arrangement.

Request Service

Tell us what broke. We’ll tell you what it takes.

01
Call or write
Tell us what broke, and where.
02
Crew on site
We schedule around your operations, after hours included.
03
Repair or quote
Fixed on the spot, or a written quote within 2 business days.
04
Back in service
We test the seal and clean up behind us.
Request Service

1-year warranty on our labor and every RSNE-built door.